...

JANI-SERV, INC.

WE TAKE PRIDE IN OUR WORK

Construction Cleaning Scope of Work

Rough, Mid, and Final cleaning includes, but is not limited to:

Windows and Doors:

  • Windows and doors cleaned on the interior and exterior (glass, frames, and tracks). Remove minor paint, glue, drywall compound, etc. left on surfaces.
  • Remove paint spots/ over-spray on wood, glass or metal, and other surfaces. Grilles, and mullions cleaned carefully with a straight edge 1/16” beyond the putty line (as not to damage putty).
  • Clean windows and door tracks thoroughly, removing all debris and dust, and scrubbing as necessary. No razor blades will be used on tempered glass.

 

Carpets and Concrete:

  • Vacuum all floors, mop all flooring as well, and scrub with floor machines where needed.
  • Removal of all dust by first removing debris with a broom, then vacuuming and mopping, and rinsing clean multiple times.
  • Paying particular attention to using the manufacturer’s choice method for cleaning. Paying particular attention to surface types and using cleaning materials and methods that will not leave damage. 

 

All types of floors:

  • Removal of all dust by starting with a broom, then vacuuming and mopping, and rinsing clean multiple times. Paying particular attention to using the manufacturer’s choice and method for cleaning.

 

Walls:

  • Wipe down walls to remove all dust and scuffs, etc.

 

Stairwells:

  • Wipe down walls and railings, remove all dust, remove drywall compound and glue from landings and stairs, and hand clean stairs. 
  • We use the manufacturer’s choice for cleaning.


Cabinets and Counter-tops:

  • Clean and dust the interior and exterior of all cabinets.
  • Remove glues, compounds, and clean sinks, faucets, misc. Remove stickers and protective plastics.


Interior Trims:

  • Clean and dust interior trims including doors, shelves, base molding, door casing, door hardware, and bathroom accessories.


Bathrooms:

  • Clean and disinfect all toilets and urinals, clean and polish bathroom fixtures, sweep and mop, and disinfect floors, and clean bathroom mirrors with glass cleaner.


Appliances:

  • Remove tape, stickers, and other packaging materials from appliances.
  • Clean and dust appliances thoroughly.
  • Re-install any removed accessories and place any instruction booklets, warranty materials, and other appliance information in a central drawer.


Fixtures:

  • Clean and dust all light and plumbing fixtures.
  • Remove any stickers.


HVAC:

  • Clean heating and A/C equipment, registers, grilles, and floor duct terminals.
  • Vacuum and wipe down as necessary.


Water Heating Systems and Electric Panels:

  • Wipe down and remove stickers, and dust from the exterior.